연마제 및 산업용 연마.

EP-Sisal-Buff Compact buff, stitched at 1 cm intervals, 45° sisal thread cut to minimize buff wear, in a steel-clench-ring (type K1 or K2). Compact pre-polishing buff, high stock removal, little dust formation – Ø 150 – 980 mm – width 12 – 22 mm – ply 6 – 12 – stitching 5 mm or 10 mm intervals Applications: hollow-ware – outside and inside, as single buff for zone areas e.g. pouring lip as stacked buffs for flat surfaces of steel, iron and non ferrous metals, hand, automatic or robotic use

EP-Polishing-Wave-Buff Cotton cloth cut at 45°, held in a steel-clench-ring, ring-center or card-board-center; constant fixed number of folds, most aggressive fold, manufactured in all cotton types certain limitations with treated materials – Ø normal density 300 – 430 mm high densitiy 400 – 600 mm – width 25 mm – density normal and high Applications: cooking pots and hollow-ware, tubes, mounted to allow for homogeneous polishing without gaps or lines, especially used as a single buff on edges (electric iron-bases, cooking-pots)

EP-Sisal-Cotton-Buff, open folding Sisal and cotton cloth sewn together, cut at 45° to prevent wear, in a steel-clench-ring (type K1 or K2); light wavy and irregular folding enables the buff to work elastically, flexibly – Ø 150 – 600 mm – width appr. 20 mm – ply 4 Applications: aluminium profiles, flat surfaces, tubes, cutlery contoured work pieces hand, automatic or robotic use

결함을 제거하면서 매우 정밀하게 광택 연마하며, 평면에서도 깊고 어두운 광학 반사와 높은 광택을 제공합니다. 가공물과 버핑 휠을 깨끗하게 유지하고 매우 낮은 온도의 탈지를 돕고 버핑 휠을 경화시키지 않습니다.