TEMI · Technical information
Clench rings, rings and cardboard centres
Retaining and centring systems K1, K2, K3, MK, MN, MG and MM. Dimensions do not automatically define combinations of items.
Documented data
EP-Steel-Clench-Rings and Cardboard Centers
Steel-clench-rings in our buffs are the most economical means of mounting polishing and sisal buffs. Steel-clench-rings are mounted directly onto the spindle or with the appropriate center-discs. Alternatively, cardboard centers of every bore size, can be fitted for easier mounting, however this leads to increased buff cost. The buff disposal costs with cardboard centers are also higher. We would always suggest the use of steel-clench-rings, where this is possible.
| Steel-Clench-Ring-Type | Width | Inside Ø |
|---|---|---|
| K1 | 18 mm | 60 – 430 mm |
| K2 | 20 mm | 60 – 430 mm |
| K3 | 30 mm | 60 – 430 mm |
| MK | 10 mm | 14 hexagonal in mm |
| MN | 10 mm | 19 hexagonal in mm |
| MG | 10 mm | 19, 24 hexagonal in mm |
| MM | 15 mm | 19, 24, 32 hexagonal in mm |
Sources and documents
Data remain associated with their stated brand and source. Confirm configuration and availability with the local office.