Contact-Wheels for Belt Grinding

Coarse-grinding and Flat-Grinding

60 to 90° shore A, coatings medium to hard, coatings mostly serrated grinding belts of grit 60 – grit 80

types A66, A77 or plastidur types A8, A11

Normal Grinding coatings medium approx. 60° shore A grinding belts of grit 150 – grit 280 types A1, A66, A77 mostly flat face, at times serrated

Fine Grinding coatings medium to soft, 30 to 60° shore A grinding belts of grit 280 – grit 500 types A1, A9, A90, A10, A100, A14

Contour Grinding coatings soft from 30 to 40° shore A grinding belts of grit 150 – grit 500 types A9, A90, A10, A100, A14, A15, A16

Rubber Rollers Foil coating rollers, press and perforating rollers, contact rollers for wide belt grinding, silicon rollers, …

Deburring Brushes

Deburring of Flat Parts

types T1, T5, B5, P10, grits 46 to 280

Deburring of Curved, Contoured Parts types M, grits 80 to 280

Abrasive Flap Wheels

Coarse-Grinding and Deburring

grit 60 to grit 150

types B1, B3, B6/K

Normal Grinding grit 120 to grit 220 types B1, B3, B4, B6/K

Fine Grinding grit 240 to grit 400 types B1, B3

Tool Manufacture types B2, B8

Finishing Wheels for Blending

Blended Satin Finish

types B7, B10/K, B7/SL, B70

Printed Circuit Boards type B7W – rollers

Sisal Brushes for Pre-Polishing

Flat Surfaces

dense buffs with pronounced folding and hard to very hard impregnation

types C1, C4, C10, C13

Curved, Contoured Parts elastic buffs with soft impregnations types C4, C8, C11

Hollow-Ware – Sinks types C3/R, C4/R, C50, P1, P3, M

Impregnations for Non-Ferrous Metals V31, V33, 2E3

Impregnations for Steel and Stainless Steel 2E3, V25, V28, V48

Fiber Brushes Fibre cup and cylinder brushes

Polishing Buffs for Mirror Finishing

Flat Surfaces

types D1A/K, D1C, D1WP

Contoured or Curved Parts type D1C

Materials Qualities

Colouring

qualities NFR (roughed up), NKG (soft)

Non-Ferrous Metals qualities NF (medium), C32 (robust)

Stainless Steel and Steel qualities NKG (soft),NKW (medium), C32 (robust)

Polishing Discs, Full and Half Leaf Types

“Metre-buffs” for Stand Alone and Robotic Polishing Machines

• GENERAL RECOMMENDATIONS
• CUTLERY BRUSHES
• BELT-GRINDING
• INFORMATION AND ADVICE
• SPEEDS