Type C3
EP-Sisal-Cord-Buffs
Twisted cord around a steel-ring, very flexible and soft;
– Ø 60 – 230 mm
– width appr. 5 mm
– bore 14/6, 19/6 in mm
Applications:
cutlery, mocca coffee spoons
automatic use
Type C3/KU
Twisted Sisal-Cord-Buff on a Plastic Center
Profiled or straight; more flexible than C4/KU
– Ø 60 – 110 mm
– width 15 – 50 mm
– bore 19/6 in mm
Applications:
cutlery, blades, sinks,
automatic use
Type C4/KU
Braided Sisal-Cord-Buff on a Plastic Center
Profiled or straight;
– Ø 60 – 110 mm
– width 15 – 50 mm
– bore 19/6 in mm
Applications:
cutlery, blades, sinks,
automatic use
For other diameters, widths or bores, we offer Type C4/KE
Type C4/SR
Braided Sisal-Cord-Buff on Steel Tube
Profiled or straight;
this brush is markedly denser than the C4/KU;
higher longevity, more aggressive;
– Ø 60 – 230 mm
– width 15 – 150 mm
– bore 19/6, 24/6 in mm
Applications:
cutlery, blades, knife backs, sinks,
automatic use
Type C3/SR
Twisted Sisal-Cord on Steel-Tube
More flexible than C4/SR
Type C4W/KK
EP-Sisal-Cord-Roller
Braided sisal cord in a plastic center;
highly elastic;
– Ø 180 – 300 mm
– width 30 – 150 mm
– circumference profiled or straight
Applications:
cutlery,
automatic machinery
Type C8W/KK
EP-Sisal-Cotton-Roller
Sisal and cotton sewn together,
cut at 45° on a plastic center;
slightly wavy and irregular folding;
– Ø 150 – 350 mm
– width 20 – 150 mm
– bore 19/6, 24/6, 32/6 hexagonal in mm 45, 70 mm with keyway
– circumference profiled or straight
Applications:
cutlery,
automatic machinery
Type C20
EP-Sisal-Flap-Wheel
Sisal and cotton sewn together as flaps, cut at 45° on a plastic center; ring center or solid center; the mixture of cotton and sisal increases the polishing performance of the product and gives more shine than C19; complete adaption to work piece profiles;
exceptionally longevity leading to longer machine running time;
– Ø 70 – 1000 mm
– width 30 – 100 mm
Applications:
gap- and lineless pre-brushing of convex work pieces, line-free polishing, tubes,
wheel-rims, aluminium profiles cutlery, knife-blades, containers, convex profiles,
hand-and automatic machinery
Type C19
EP-Sisal-Flap-Wheel
Pure sisal flaps without cotton material;
softer product type than type C20
Type C28/8 – C28/12
EP-Sisal-Flap-Wheel with Coated Abrasive Flaps
Sisal and cotton cloth sewn together as flaps, cut at 45° and mixed with coated abrasive flaps, on a plastic center; ring center or solid center; the inclusion of coated abrasive flaps increases the stock removal over that achieved by the C20 without coated abrasive; the advantages compared with synthetic
abrasive buffs and rubber abrasive bonded wheels are increased elasticity, minimum break out of mixed coating; optimal impregnation: V25 green = hard, 2E3 red = medium hardness
– Ø 100 – 1000 mm
– width 30 – 100 mm
Applications:
fine grinding with concurrent polishing, knife, blades, skates, scissor parts, knife handles, putty knives and spreaders,
hand and automatic machinery